Showing 17–32 of 394 results
2-1/8″ O.D. x .010″ Die Shim Die Shims are in stock. Die Shims sit below the Die and allow the Die to sit higher in the Die Block. Die Shims are sold in packs of 25. Additional Information Part #: 36DS2125010 Dimensions: Outside Diameter: 2.125″Thickness: .010″ Proudly Made in the USA
2-1/8″ O.D. x .030″ Die Shim Die Shims are in stock. Die Shims sit below the Die and allow the Die to sit higher in the Die Block. Die Shims are sold in packs of 25. Additional Information Part #: 36DS2125030 Dimensions: Outside Diameter: 2.125″Thickness: .030″ Proudly Made in the USA
2-3/4″ O.D. x .010″ Die Shim Die Shims are in stock. Die Shims sit below the Die and allow the Die to sit higher in the Die Block. Die Shims are sold in packs of 25. Additional Information Part #: 36DS2750010 Dimensions: Outside Diameter: 2.750″Thickness: .010″ Proudly Made in the USA
2-3/4″ O.D. x .030″ Die Shim Die Shims are in stock. Die Shims sit below the Die and allow the Die to sit higher in the Die Block. Die Shims are sold in packs of 25. Additional Information Part #: 36DS2750030 Dimensions: Outside Diameter: 2.750″Thickness: .030″ Proudly Made in the USA
2″ Punch Nut Wrench Wrench is in stock. For Punch Nuts with a hexagon size of 2″. Additional Information Part #: P20A0043 Dimensions: Hexagon Size: 2.031″ Proudly Made in the USA
2″ Sch 40-90° Pipe Notch Tooling Pipe Notch Tooling notches 2″ Sch. 40 Pipe at 90° in two machine cycles. This Pipe Notch Tooling is in stock for Piranha™ ,Edwards™, and many other Ironworkers. *Pipe Notch Tooling requires Pipe Notch Housing. Additional Information Part #: CPDA0006 Proudly Made in the USA
2″ Sch 80-90° Pipe Notch Tooling Pipe Notch Tooling notches 2″ Sch. 80 Pipe at 90° in two machine cycles. This Pipe Notch Tooling is in stock for Piranha™, Edwards™, and many other Ironworkers. *Pipe Notch Tooling requires Pipe Notch Housing. Additional Information Part #: CPDA0015 Machines: Fits all Piranha™ and Edwards™ Ironworkers Proudly Made…
3-3/4″ O.D. x .010″ Die Shim Die Shims are in stock. Die Shims sit below the Die and allow the Die to sit higher in the Die Block. Die Shims are sold in packs of 25. Additional Information Part #: 36DS3750010 Dimensions: Outside Diameter: 3.750″Thickness: .010″ Proudly Made in the USA
3-3/4″ O.D. x .030″ Die Shim Die Shims are in stock. Die Shims sit below the Die and allow the Die to sit higher in the Die Block. Die Shims are sold in packs of 25. Additional Information Part #: 36DS3750010 Dimensions: Outside Diameter: 3.750″Thickness: .030″ Proudly Made in the USA
3/16″ Round x 1″ Long Keystock 3/16″ Round x 1″ Long Keystock is used to align H1, H2, H3, & H4 shaped punches that utilize a v-groove. Keystock is in stock. Additional Information Part #: CPDK0007 Dimensions: Length: 1.000″ Diameter: 0.187″ Proudly Made in the USA
35mm Round Die All sizes listed are in stock. Contact us for custom sizes not listed. Commonly paired with 12mm Round Punches. *35mm offset dies are designed for punching angle iron leg down on Geka™ ironworkers. Maximum material thickness 1/4″. Special die holder required. Additional Information Dimensions: Outside Diameter: 1.377″ Height: 0.687″ Punch & Die…
4-3/4″ O.D. x .010″ Die Shim Die Shims are in stock. Die Shims sit below the Die and allow the Die to sit higher in the Die Block. Die Shims are sold in packs of 25. Additional Information Part #: 36DS4750010 Dimensions: Outside Diameter: 4.750″Thickness: .010″ Proudly Made in the USA
4-3/4″ O.D. x .030″ Die Shim Die Shims are in stock. Die Shims sit below the Die and allow the Die to sit higher in the Die Block. Die Shims are sold in packs of 25. Additional Information Part #: 36DS4750030 Dimensions: Outside Diameter: 4.750″Thickness: .030″ Proudly Made in the USA
4mm x 4mm Keystock 4mm x 4mm Keystock is used on Sunrise and Kingsland machines. It is used to align shaped punches that utilize a 4mm wide x 2.5mm deep keyway. Keystock is in stock. Additional Information Part #: CPDK0008 Dimensions: Length: 1.000″ Width: 0.157″ Height: 0.157″ Proudly Made in the USA
4mm x 6mm Keystock 4mm x 6mm Keystock is used to align shaped punches that utilize a 4mm wide x 4mm deep keyway. Keystock is in stock. Additional Information Part #: CPDK0002 Dimensions: Length: 1.000″ Width: 0.157″ Height: 0.236″ Proudly Made in the USA
6″ Center Punch Center Punch is in stock. Center Punch is used to mark the center point of the hole before punching. Additional Information Dimensions: Length: 6.000″ Proudly Made in the USA
