Showing all 9 results
CB – Chill Bar Aluminum block that’s used to cool the heat repair compound and leave a flat finish. Features After applying & curing a heat cure repair compound, press with the chill bar (CB) immediately to level and cool the repair. Check repair, repeat process as needed. Can also be used to press in a grain pad.
FM – Fine Mesh 1/2 yd. A fine nylon mesh. Used for reinforcing vinyl or leather repairs. By putting a thin layer of repair compound on the surface, then a piece of vinyl mesh, followed by a another layer of repair compound, you heat weld the repair together like a sandwich for strength and durability.
HAP – Sub-patch Material 12″ x 24″ This sub-patch material is for vinyl, fabric and leather repair. When cutting a sub-patch, round the corners. Heat activated adhesive on gloss side. Additional liquid adhesive may also be used (HH66 sub-patch adhesive).
HH-66 Sub-patch Adhesive A flexible solvent based sub-patch adhesive for vinyl and leather repairs. Features Excellent adhesion and flexibility for sub-patches. Application Apply between sub-patch material (HAP) and the under side of vinyl or leather. Allow to dry. Use low heat to speed drying. Press together.
Spatula Metal blade with wood handle for spreading repair fillers and compounds.
T12 – Compound Thinner 1 oz Thinner for heat cure leather and vinyl repair compounds.
TM-9 Teflon Mat A 9” x 9” sheet of Teflon used as a barrier in vinyl repairs to keep tools from sticking to repaired areas. For example chill bars and heat irons. Can also be used when repairing by super glue methods.
VT1100 – Heat Gun VT1100: includes 3/8″ reducer tip Features Variable temperature control dial Temperature from 250¬∞F – 1100¬∞F Solid state construction Built in safety stand Two speed motor High quality heat element Weighs only 1.6 lbs 1200 Watts 120 VAC/10 Amp
